名片曝光使用說明

步驟1：創建名片

微信掃描名片二維碼，進入虎易名片小程序，使用微信授權登錄并創建您的名片。

步驟2：投放名片

創建名片成功后，將投放名片至該產品“同類優質商家”欄目下,即開啟名片曝光服務，服務費用為：1虎幣/天。(虎幣充值比率：1虎幣=1.00人民幣)

關于曝光服務

名片曝光只限于使用免費模板的企業產品詳細頁下，因此當企業使用收費模板時，曝光服務將自動失效，并停止扣除服務費。

<

返回首頁

日本巖崎IWATSU   超高壓探頭  HV-P60   HV-P30  日本原裝進口


產品簡介：能夠測量60KV/30KV 的高壓探頭


HV-P60

HV-P60

High-voltage waveforms of up to DC 60 kV, pulse 80 kV measured by oscilloscope


Wide bandwidth, DC to 50 MHz


Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage

Specifications Maximum input voltage DC 60 kV or AC peak*Single-shot pulse of 80 kV, standard pulse wave Bandwidth DC to 50 MHz, within -3 dB Rise time 7 ns or less (for probes only) Input RC 1000 MW ±5% //5 pF ±2 pF Attenuation 2000:1 ±5% Cable length Approx. 4 m Connector BNC type Used for Oscilloscope with input RC: 1 MW, 15 to 50 pF Size Approx. 88 mm (?) x 338 mm (L) Weight Approx. 3.5 kg (including accessories) Accessories Matching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bag Options High-voltage probe stand SK-301 (produced upon order)The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30). * The P-P voltage drops if the CW is 100 kHz or greater.

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1.


產品推薦
“日本巖崎IWATSU 超高壓探頭HV-P60 HV-P30”信息由發布人自行提供，其真實性、合法性由發布人負責。交易匯款需謹慎，請注意調查核實。
//