產品分類 更多>>
產品推薦
廠家(產地)
美國
牌號
UHMW-PE
加工級別
擠出級,注塑級,脫模級,模塑
特性級別
熱穩定性,增強級,導電級,高滑動,阻燃級,耐低溫,抗靜電,透明級,增韌級,耐水解,耐老化,抗化學性,耐候,耐高溫
用途級別
醫用級,電子電器部件,填充級,照明燈具,食品級,管材級,汽車部件,通用級,板材級,型材
銷售方式
品牌經銷
品牌
Quadrant
類型
標準料
聚合物；熱固性；聚氨酯，TS
材料說明：自由基固化（雙氧水、紫外）和200 nm的PBD CSR顆粒40%濃度載體樹脂。與Vinyl Ester和不飽和聚酯的應用
| Specific Gravity | 0.930 g/cc @Temperature 22.8 °C | 0.930 g/cc @Temperature 73.0 °F | ASTM D792 |
| Water Absorption at Saturation | 0.010 % | 0.010 % | ASTM D570 2 |
| Hardness, Shore D | 66 @Temperature 22.8 °C | 66 @Temperature 73.0 °F | ASTM D2240 |
| Tensile Strength | 40.0 MPa @Temperature 22.8 °C | 5800 psi @Temperature 73.0 °F | ASTM D638 |
| Tensile Modulus | 0.552 GPa @Temperature 22.8 °C | 80.0 ksi @Temperature 73.0 °F | ASTM D638 |
| Flexural Strength | 24.1 MPa @Temperature 22.8 °C | 3500 psi @Temperature 73.0 °F | ASTM D790 |
| Compressive Strength | 20.7 MPa @Temperature 22.8 °C | 3000 psi @Temperature 73.0 °F | ASTM D695 |
| Compressive Modulus | 0.552 GPa @Temperature 22.8 °C | 80.0 ksi @Temperature 73.0 °F | ASTM D695 |
| Shear Strength | 33.1 MPa @Temperature 22.8 °C | 4800 psi @Temperature 73.0 °F | ASTM D732 |
| Coefficient of Friction, Dynamic | 0.12 | 0.12 | QTM 55007 |
| Sand Slurry | 10 | 10 | 1018 Steel = 100; ASTM D4020 |
| Limiting Pressure Velocity | 0.105 MPa-m/sec | 3000 psi-ft/min | (with 4:1 safety factor applied); QTM 55007 |
| Dielectric Strength | 45.3 kV/mm | 1150 kV/in | ASTM D149 |
| Thermal Conductivity | 0.409 W/m-K | 2.84 BTU-in/hr-ft2-°F | ASTM E 1530-11 |
| Melting Point | 135 °C | 275 °F | ASTM D3418 |
