HONDA PUMPS,HONDA KOKI,本多機工泵，本多泵，HONDA泵，本多離心泵 本多機工株式會社HONDA KOKI.CO.LTD。成立于1951年，產品有系列HONDA PUMP,水泵，渦卷泵，噴射泵等系列產品。 臥式離心泵 (HCS/HC) 臥式離心泵 (UGS/UGF) 臥式離心泵自吸式 (SP/SPG) 臥式離心泵 (BALS) 臥式離心泵 (GS/GF) 吸離心泵和D型橫軸 (CHFWS/CHFW) HRG/HRO/RG (ロトジェットポンプ) MSP(F)/MSPG(F) (橫軸低NPSH自吸式ポンプ。 HCS/HC (Volute Pump) Horizontal, single stage volute casing pump, used in a wide range of applications such as water drainage, pits and tanks, seawater, cooling, coating etc. Possible installation of Cooling and insulating jacket (Optional). LNPS/LNPF (Low NPSH Volute Pump) Low NPSH Pump with high reliability under severe suction conditions. Permit extremely low NPSH allowing the reduction of installation costs. Applications: vacuum evaporator, crystallizers, liquefied gas transfer, boiler feed, condenser drainage, chemical reactor, desalination plants... BLS (Latex Emulsion Pump) Horizontal, single-stage with full-open impeller. Designed to handle latex, emulsion liquids and crumb slurry mediums such as ABS and SBR. Recognized as the best pump of its kind worldwide, able to deliver clog-free transfer with a viscosity range of 750mPa.s～1999mPa.s. HRG/HRO/RG (Roto-Jet Pump) Single Stage Pitot Tube Pump for high pressure applications. The Roto-Jet pump has 2 basic working parts a rotating case with a stationary pick-up tube mounted within it. Used in a wide variety of applications that require smooth, pulsation-free and high pressure streams. Typical applications: Reverse osmosis, pulp and paper mills, fuel injection, boiler feed, automotive industry. BNS/BNF/BNC/BALS (Non-Clog Volute Pump) Non-clog pump (for sewage and solids) capable to handle solid size up to 1/3 of inlet bore. Used in various application such as turbines and piping Ball-Circulation. FRS/FR (Cascade Pumps) Cascade pump with special features impeller, suitable for low flow and high head applications with respective ranges of 1 to 3m3/hr flow and head from 120 to 140m. HAS (Volute Pump) Horizontal, foot support with closed impeller design. High efficiency and low energy consumption pump fully ISO complying. Used in a wide range of applications such as water drainage, ground water and treatment systems. GS/GF (Volute Pump) Single stage pumps in back pull-out design, providing a higher flow/Head than HCS/HC model.